MUST HAVE A HEAT PRESS

Temp-:318

• Pressure: Firm
• Time: 15-18 Seconds
• Teflon or parchment paper on top.
• COLD peel- Transfer must cool down completely prior to removing the transfer film. Recommend pulling off at an angle.
• For a mattee finish, place the garment back on the press and press again covered for 5-10 seconds. I recommended this to really adhere the design into the fibers. You should be able to see the fiber marks in the design.

**If you notice any residue flip transfer film over and press again for 10 seconds, this should remove the residue.

***Disclaimer this is time and temp that works for us. Please understand that your heat press may require different settings. You may have to adjust accordingly.

I am not responsible for operator error. If you are new or apprehensive, I recommend ordering a couple extra transfers.